New Construction Windows in Prescott, AZ

When you need new construction windows

New construction windows have a nailing fin around the frame that fastens directly to the wall sheathing before the exterior finish goes on. They're the right product when the framing is exposed:

• A new custom home
• An addition, sunroom or garage conversion
• A remodel that removes exterior stucco or siding anyway
• Enlarging an opening or adding a new one, such as a bedroom egress window
• Replacing windows where the old frames have rotted or the openings have water damage

If your walls are finished and the openings are sound, replacement windows are usually faster and less expensive.

What makes it different in Prescott

New homes and additions in the Prescott area are often designed around the view: big picture windows toward Thumb Butte, the Granite Dells or the Bradshaw Mountains, and walls of glass facing south and west. Those are exactly the exposures where glass selection matters most. A low solar heat gain coefficient on west-facing glass keeps summer afternoons comfortable, and a low U-factor holds heat on winter nights.

Code matters too. The City of Prescott has adopted the International Wildland-Urban Interface Code, whose glazing provisions recognize tempered glass, multilayered glazed panels, glass block and fire-rated glazing for homes in the interface (Prescott City Code 6-2). Bedrooms need egress windows sized to code, and glass near doors, tubs and stairs often must be tempered. New openings and enlarged ones require a building permit, which your builder or we will carry depending on the job.

What the work involves

Planning with your builder or architect

We review the plans, confirm rough opening sizes, recommend products for each exposure and build a window schedule. Lead times for custom windows can run several weeks, so ordering early keeps the framing crew from waiting.

Flashing and installation

A nail-fin window is only as good as its flashing. We install sill pans, set each window plumb, level and square, fasten the fin, and lap flashing tape over the fins in the right order so water sheds outward over the weather barrier. That sequence is what keeps monsoon rain out of the wall for decades.

Choosing glass for each elevation

On a new home we can do something replacement projects rarely allow: choose glass for each side of the house from the start. West-facing view walls get a low solar heat gain coefficient so they don't overheat on summer afternoons. South-facing glass can admit more winter sun to warm the house. North walls get the lowest U-factor practical. Every window's NFRC label lists these ratings so you, your builder and the inspector can confirm them (NFRC).

Inspection and handoff

We check every sash for smooth operation and a tight lock, leave labels in place for the building inspector, and give you or your builder the manufacturer's warranty documents.

What it costs

New construction window pricing depends on size, frame material, glass package and the number of units. Forbes Home lists average per-window costs of $450 to $900 for vinyl, $450 to $1,100 for fiberglass, $550 to $1,950 for wood and $600 to $2,500 for composite, and floor-to-ceiling glass at $700 to $1,600 per linear foot (Forbes Home). We price from your window schedule, line by line. More ranges are on our window pricing page.

Why builders and homeowners use us

• One point of contact from window schedule to final inspection.
• Correct flashing, the detail that decides whether a wall stays dry.
• Code-aware product selection for egress, tempering and wildfire glazing.
• Our own crew, scheduled around your framers and stucco crew.

Our process

1. Plan review and window schedule.
2. Written quote per window, with product options.
3. Order once rough openings are confirmed.
4. Install and flash when the framing is ready.
5. Final check and warranty handoff.